Fish in the garden pond.
In order to breed breeds that are demanding oxygen (carp, pike, etc.), you need to set a large enough reservoir. If to breed carp or carps to grow, a reservoir may have a smaller size. The pond can have a different shape, but more exotic species in the ponds with irregular shapes: round, oval, or curvilinear. The pond should be different levels, as the fish of different ages need different water temperature regimes.
Want to watch movies Disney online great quality, watch news, recently released. Watch all new to ivi. There are all different genres of movies and cartoons. A wide selection of excellent cinema for a large audience. Prices for movies are readily available + positive sea and good mood.
So depth can be the difference from half to two meters in the center, and about half a metre around the edges. It is best if the bottom will be sloped, and the banks will be in the form of concrete steps that have a width of 30-40 cm and a depth of 20-30 centimeters. Including ladder drops you can use to grow plants in shallow containers, they also, you will have easy access to the water. The steps are not needed all the way around, they should only be done in a location with convenient approach. In that case, if semnalizare fish you will not fully catch, you need the arrangement in the water wintering well.
Before the concrete bottom of the pond, you need to make the pillow. During concreting of reinforcement is used for wire-rod. The cell size shall be fifteen by fifteen centimeters. Before the concrete bottom, for winter you need to install reinforced concrete pipe with a diameter of one meter. It should be located two meters lower than the level of winter groundwater levels. In addition, you need to consider the presence of small soil indentations on the bottom in order to plant aquatic plants.
After mounted on the bottom of the rebar, pour the concrete. The solution is then carefully compacted. After hardening of the mortar at the bottom, is the concreting of the walls, which are sloped from the center of the reservoir. This is used for formwork. If the shores are winding, the formwork should be flexible, made of plywood. The concrete should have a thickness of 15 centimeters. To ensure that the waterproofing was the best, on concrete that is still wet, apply the tar paper in one or two layers. For a good mortar, you need to make sure that he does not dry, so it is laid out wet burlap or grass.
In order to fill the pool, you can use water system. In order to collect the excess water on the shores is necessary to arrange the drain pipe.